Rope winches

Winches (pulling devices) are intended for pulling the cable underground: in a ditch, in trenches, in wells, in cable sewer pipes, as well as for the installation of overhead transmission and fiber optic lines.

The winch capstan is equipped with two wheels with grooves that transfer the pulling force to the cable and pull it. The receiving drum is not used to pull the cable, which gives the following advantages: the speed of pulling in does not depend on the amount of cable and cable wound on the drum, the grooves correspond to the diameter of the cable, thanks to which the cable does not wear out and its service life is not shortened, and the capstan drums have been subjected heat treatment and also are not subject to quick wear. The cable on the take-up drum is stored under tension.

The automatic cable laying system arranges it freely. Maintaining and attaching the cable to the take-up reel is simple and reliable. Pulling force and speed on the capstan are constant. The device automatically maintains the maximum set pulling force and when it is reached its value will not be exceeded. Simple controls. Accurate and careful (safe) cable pulling. We use only the latest technologies in the production of winches for cable installation. The high quality of our winches is what sets them apart from competing solutions. The winch is easy to control.

The main parameters of the winch for cable installation: maximum pulling force, pulling speed at maximum load and maximum pulling speed.

• Standard cable length for pulling a 1000 or 500 m cable.
• The winch is completely autonomous.
• The low weight and compact silhouette of the cable winch allows work in tight conditions.
• The retraction process is stable due to the limited inlet location.
• Special pressure rollers prevent the cable from wearing out when being pulled in.
• The maximum allowable pulling force is set on the winch, which prevents exceeding the permissible values ​​and damaging the cable.
• Automatic control of constant pulling force.
• User specifies strength, and then the machine does everything by itself.

Technical specifications:

• Drum with a 500 m or 1000 m cable
• Drum drive (Bulgaria)
• Winch drive (Bulgaria)
• Capstan reducers (Italy)
• Capstan overload protection system (Italy)
• Drum overload protection system (Italy)
• Exclusion system at the drawbar pull (Italy)
• Tractive force presetting system adjustable from 0 to the required value (Italy)
• Accelerated reverse gear: doubles the speed of unwinding the link
• 10 µm drum filtration system
• 10 µm capstan filtration system
• Automatic cable laying system
• Clutch (swivel) to prevent cable and cable from twisting
• Diesel or gasoline engine with air cooling from Kohler, Subaru or Briggs & amp; Stratton </ li>
• Elements for stretching or anchoring the winch
• Retaining elements for height and tilt adjustment of AL-KO winch
• Electrohydraulic control panel (Italy)
• Hydraulic oil cooling system made in Italy.
• Recorder – recording device with USB port and memory card, with electronic display and real time pulling force display in kg (option)
• Capstan drums made of hardened steel (increased machine life)
• Steel frame in the building with raised protective panels (provides convenience of work in bad weather)

Technical specifications:

• Maximum pulling force: 10 kN (1000 kg)
• Maximum pulling speed: 0-20 m / min
• Drive: 5 kW electric motor
• Chassis: single axle or double axle
• Drum capacity for steel cable: up to 500 m
• Cable diameter: 7 mm
• Cable length included: 100 m / 500 m
• Winch parameters recorder: option
• Retaining elements: are
• Elements for fixing the winch: are
• Work in climatic conditions: operation at any time of the year
• cable for excavations GTU 10

Technical specifications:

• Maximum pulling force: 10 kN (1000 kg)
• Maximum pulling speed: 0-45 m / min
• Engine: 9 horsepower gasoline engine
• Chassis: single axle
• Drum capacity for steel cable: up to 1000 m
• Cable length included: 500/1000 m
• Cable diameter: 7 mm
• Winch parameters recorder: option
• Retaining elements: are
• Elements for fixing the winch: are
• Work in climatic conditions: operation at any time of the year
• Capstan: double drum.

Technical specifications:

• Maximum pulling force: 15 kN (1500 kg)
• Maximum pulling speed: 0-25 m / min
• Engine: Gasoline engine
• Chassis: single axle
• Drum capacity for steel cable: up to 1000 m
• Cable length included: 500/1000 m
• Cable diameter: 7.6 mm
• Winch parameters recorder: option
• Trailer mounting: optional
• Retaining elements: are
• Elements for fixing the winch: are
• Work in climatic conditions: operation at any time of the year
• Capstan: double drum.

Technical specifications:

• Maximum pulling force: 30 kN (3000 kg)
• Maximum pulling speed: 0-20 m / min
• Engine: gasoline
• Chassis: single axle
• Drum capacity for steel cable: up to 1000 m
• Cable diameter: 10 mm
• Cable length included: 500/1000 m
• Winch parameters recorder: option
• Trailer mounting: optional
• Retaining elements: are
• Elements for fixing the winch: are
• Work in climatic conditions: operation at any time of the year
• Capstan: double drum

Technical specifications:

• Maximum pulling force: 35 kN (3500 kg)
• Maximum pulling speed: 0-20 m / min
• Engine: gasoline or diesel engine
• Chassis: single axle or double axle
• Drum capacity for steel cable: up to 1000 m
• Cable diameter: 10 mm
• Cable length included: 500/1000 m
• Winch parameters recorder: option
• Retaining elements: are
• Elements for fixing the winch: are
• Work in climatic conditions: operation at any time of the year
• Capstan: double drum

Technical specifications:

• Maximum pulling force: 50 kN (5000 kg)
• Maximum pulling speed: 0-20 m / min
• Engine: gasoline or diesel engine
• Chassis: single axle or double axle
• Drum capacity for steel cable: up to 1000 m
• Cable diameter: 12 mm
• Cable length included: 500/1000 m
• Winch parameters recorder: option
• Retaining elements: are
• Elements for fixing the winch: are
• Work in climatic conditions: operation at any time of the year
• Capstan: double drum

• Powerful hydraulic device for removing large and heavy parts attached by pulling.
• The press is made on a platform that allows the device to be moved to the place of work using a crane, lift or on additional wheels available for the device.
• Built-in electric pump.
• Hydraulic cylinder return.
• Adjustable steel handles, additionally secured with a chain.

Technical specifications:

• Strength: 110 t
• Actuator stroke: 200 mm
• Chuck diameter 1070 mm
• Handle depth 1005 mm
• Dimensions (length × width × height): 2288 × 1520 × 662 mm
• Weight 640 kg

The hydraulic aggregate is used to generate pressure and flow of the working medium, as well as to control hydraulic executive mechanisms (cylinders, hydraulic motors, special mechanisms) in the hydraulic systems of metal cutting machines, woodworking, automatic lines, forging and compression devices, foundry equipment and other.

Technical specifications:

• Engine: 14 horsepower gasoline.
• WGMZ oil according to TU 38.101479-86, Poland: HL-46
• 10 µm filtration system
• Oil flow 30 l / min
• Oil tank capacity 35 l
• Dimensions (length × width × height): 800 × 700 × 700 mm
• Weight 100 kg

The cable tappet is used to install and pull the cable in by pushing, which reduces the load on the winch.
We use the pusher as a stand-alone device, as well as in conjunction with a winch for pulling the cable. The pusher consists of a hydraulic aggregate and a pushing device.
Usually used before the ditch bend in a set with angular rollers.

Technical specifications:

• Rated power: 7 kW
• Maximum cable pushing force: 9 kN
• Cable feed speed 5-20 m / min
• Diameter of push-in cable 65-160 mm
• Operating temperature, ° С -15 … .. + 40
• Dimensions [mm] (length × width × height): 850 × 500 х 450
• Weight 60 kg

Roll for pulling the cable in a ditch, cable gland or on the ground.

Technical specifications:

• Roll width 150 mm
• Maximum cable diameter 120 mm
• Maximum load 300 kg.
• Dimensions [mm] (length × width × height): 300 × 235 х 255
• Weight 5 kg

Modular cable reel for passing arcs (bypassing angles) when installing a cable line.

Technical specifications:

• Roll width 150 mm
• Maximum cable diameter 120 mm
• Maximum load 300 kg.
• Dimensions [mm] (length × width × height): 540 × 255 х 290
• Weight 10 kg

Angular vertical roll used for pulling the cable in a trench or on the ground.
Horizontal or vertical use.

Technical specifications:

• Roll width 150 mm
• Maximum cable diameter 120 mm
• Cable bend radius: 700 mm
• Maximum load: 500 kg
• Dimensions [mm] (length × width × height): 750 × 240 х 500
• Weight 20 kg

Horizontal angle roll used to pull the cable in a trench or on the ground.
The roller is designed to bypass 90 degrees.

Technical specifications:

• Roll width 150 mm
• Maximum cable diameter 120 mm
• Cable bend radius: 800 mm
• Maximum load 300 kg.
• Dimensions [mm] (length × width × height): 795 × 325 х 250
• Weight 15 kg

Roll for pulling the cable in a ditch, cable gland or on the ground.
Used to give direction to the cable when winding the drum.

Technical specifications:

• Roll width 600 mm
• Maximum cable diameter 120 mm
• Maximum load 200 kg.
• Dimensions [mm] (length × width × height): 500 × 750 х 315
• Weight 9 kg

Roll for pulling the cable in a ditch, cable gland or on the ground.
It is used to give a straight direction of cable movement when pulling it in.

Technical specifications:

• Roll width 200 mm
• Maximum cable diameter 160 mm
• Maximum load 200 kg.
• Dimensions (length × width × height), mm: 500 × 370 х 330
• Weight 7 kg

Cable reel stand for winding the guide wire.

Technical specifications:

• Spool roll width 300 mm
• Maximum diameter of 600 mm spool
• Maximum load 300 kg.
• Dimensions (length × width × height), mm: 1000 × 500 × 500
• Weight 30 kg

Swivel (swivel, strain relief) – a very useful element, preventing the cable or cord from twisting when pulling.

Technical specifications:

• Maximum diameter: 20/30/50/60 mm
• Maximum load: 500/1500/5000/10000 kg
• Weight 0.5 / 0.7 / 1.5 / 2 kg

1. Drum with a 1000 m cord, 7 mm diameter

13. Electrohydraulic control panel
14. Hydraulic oil cooling system

Contact us!