
ST-40
Product characteristics
We present the offer for a new ST-40 machine for replacing old pipelines by static pipe bursting. The machine fits into a 1000 mm well and is lowered through a 600 mm manhole (see. Fig. on page 3.). The set includes a hydraulic power pack with 10 m hoses, a hydraulic pipe tensioning device with a hand pump, as well as 250 rods with a total length of 50 m. The set includes bursting heads specified in the specification, a set of spare parts and tools necessary for operating the machine.
It is possible to power the machine from an excavator (option without Power Pack).
The task of this innovative machine is to replace old pipelines with a trenchless method. The old pipeline can be made of any material: cast iron, concrete, stoneware, steel, – it is crushed or cut with a special head, which is pulled inside the pipe. When bursting and replacing pipelines, it is possible to keep the diameter or increase it by 1-2 dimensions.
One of the advantages of the ST-40 machine is its compact size allowing it to be placed in a well with a diameter of 1000 mm (or even less) or a very small trench.
The high degree of automation of the device allows reducing the size of the crew and increasing the level of safety at the construction site: in particular, the presence of employees inside the well when crushing and replacing pipes with the ST-40 machine is not required.
Machine features
- Automated system of feeding the rods and pulling the bursting head
- Innovative swivel rods. You no longer have to be in the well when connecting the rods.
- Ergonomic pushing system for short pipe modules
- High level of safety and ergonomics
- Small dimensions and weight
Specification:
- ST-40 machine with tools and accessories,
- 17.7 kW Hydraulic Power Pack with 10 m hoses,
- Chain of rods for pulling the head (250 pcs = 50 m),
- Bursting and pre-bursting head Ø min. 150 mm / Ø max. 225 mm,
- Crew training and commissioning of the machine at the construction site – guaranteed
Delivery conditions
Delivery terms: delivery to the customer
Lead time: 21-30 days depending on the specification
Warranty: 12 months
Weight and transport dimensions:
Hydraulic Power Pack 270 kg, dimensions (1500 × 630 × 790) mm
ST-40 machine: 300 kg, dimensions (990 × 960 × 935) mm
Rods / Chain 250 pcs.: 950 kg,
Rod / chain guide: 50 kg
Hydraulic tensioning device, bursting heads, other: 350 kg
TOTAL: 2150 kg
Technical data and dimensions
Machine dimensions with semicircular supports
990 × 960 × 935 mm
Machine weight with supports
300 kg (weight of the heaviest element: 120 kg)
Weight and dimensions of 17.7 kW Power Pack
270 kg (without working fluids), 1500 × 630 × 790 mm
Pulling force
400 kN
Typical diameters of pipelines to be replaced
110 – 315 mm
concrete without reinforcement
up to 315 mm with possible increase to 350 mm
cast iron
up to 250 mm with possible increase to 315 mm
steel
up to 250 mm with possible increase to 315 mm
Maximum length of pipeline to be replaced by bursting
60 m with short modules, (120 m – PE pipe)
Machine’s working environment
water, sewerage (in flooded well), -20ºC / +40ºC
Hydraulic parameters:
Working pressure of hydraulic cylinders
20 MPa
Output of hydraulic pump
40 l/min
Installation scheme of the machine in the well:
Rest of the gallery
Delivery, training, technical service
Standard delivery conditions: DDP, CPT, ex-works. We can quickly and reliably organize dispatch, customs clearance and delivery at your door or to your construction site. Average lead time is 30 days, and in case of spare parts up to 48 hours. We ensure full technical support, training, guarantee and post-guarantee service.
“NODIGMARKET24 Damian Sobczak”
POLAND, EU, 41-807 Zabrze Plac N.Kroczka 10A/6
TAX ID: 648-20-99-938
Damian Sobczak, B.Eng.
Tel: (+48) 514-611-415
biuro@nodigmarket24.com.pl